RDN-403B Radio jamming equipment is mainly used for omnidirectional and full-band jamming of UAV targets in key protected areas. It is capable of effectively interfering with UAV remote control, image transmission and satellite navigation signals, make the interfered UAV to return home (only interfere with remote control and image transmission signals, not navigation signals) or forced landing (interfere with remote control, image transmission, and navigation at the same time).
| Jamming frequency band | Number of interference channels | Jamming distance | Jamming range | Communication interface | Operating temperature |
100MHz-6GHz | ≥9 | ≥3km | Azimuth 0°～360° | 100M network port（UDP/TCP) | -40℃～70℃ |
Features
1.The equipment adopts omnidirectional interference antenna, it can jam the targets at 360°simultaneously.
2.The jamming frequency band covers 100M-6GHz, with no less than 9 jamming channels, which can skip the specified frequency points. And the broadband interference channel has the function of independent frequency selection, which can jamming the UAV that is not mainstream or with modified communication module.
3.The equipment can be linked with radar, radio detection and photoelectric equipment, receive signals from the control system, and automatically jamming the targets.
4.The equipment is with friendly man-machine interface, automatic and manual control mode, and unattended function.
5.The equipment is designed based on IP, with good openness and scalability, and can be networked by multiple units to realize remote control and operation of equipment by the command and control center.
6.The equipment has a high degree of modularity, with BIT function and fault location function, can monitor the internal working state in real time, and has good reliability and maintainability.
7.The equipment can be erected on hilltops, rooftops, vehicles and other places with flexible and convenient use.
